F/R grade cold weather Aluminum Foil Tape

F/R grade cold weather Aluminum Foil Tape

PRODUCT DESCRIPTION

A nominal 30 micron (1.2 mil) high tensile strength aluminum foil backing, combined with a flame retardant cold weather solvent acrylic adhesive, protected by an easy-release silicone release paper.

FEATURES

• Aluminum backing provides excellent reflection of both heat and light.

• Cold weather adhesive with moderate adhesion offers good sealing and bonding on Foil-Scrim-Kraft Facing joints and seams in HVAC ductwork application.

• Good aging resistance both indoors and outdoors.

• Low moisture vapor transmission rate offers excellent sealing and patching performance.

TYPICAL PHYSICAL PROPERTIES

TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking application.

PRODUCT FORM & SIZE AVAILABLE

Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").

Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 1000m / 1200m / 1350m

STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.

PRODUCT USE: The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.